- FRTCP-IP module connects directly with Fighter panel’s main board (LAN-RS232 connector).
- FRTCP-IP gives the ability to access and control the Fighter fire alarm panel, locally through the RS232 port or remotely through the ethernet / internet (TCP/IP) in real time with the use of the specially designed SmartView software.
- Programming of the FRTCP-IP module’s communication parameters is performed through the Fighter panel’s keypad.
| Power supply |
| 10 pin box connector |
5VDC or 12-24 VDC |
| 2 way terminal block |
12-24VDC |
| Consumption |
250mA MAX |
| Connections |
Ethernet, Serial RS232 |
| RS232 |
| Ground Isolation |
50 V |
| Connector |
Female D9 |
| Ethernet |
| Ground isolation |
Complete galvanic isolation |
| Connector |
RJ45 |
| Ethernet type |
10/100 Mbps |
| Indications |
| Power |
Lit when the device is powered |
| Fault |
Indicated that isolation voltage is more than 50 V |
| LED1 |
Remote client is connected. |
| Others |
| Dimensions |
10.5 x 7.5 cm |
| Ambient conditions |
0-50°C, 95% max RH |
